Kleemann GENIUS20 - Page 32

32
MA06-03-1-01
Menu
[Direct access: CMD ->7238]
Parameter
[Direct access]
Description
Default
value
Value Range
Use KMCTB
Selection whether KMCTB board is used in
the installation.
YES
YES/NO
O: Car light
Definition of an output for the activation of
car light.
O: Car fan
Definition of an output for the activation of
car fan.
O: Overspeed
governor
Definition of an output for the activation of
overspeed governor device. This output is
addressed in KMREL board.
The definition of this output activates the
submenu “Special tools” (Menu> Setup>
Special tools). For further information
regarding this submenu, check the
corresponding chapter.
O: RSDC reset
Definition of an output that enables the
reset of relay RSDC in case of installations
with reduced clearances.
The definition of this output activates the
submenu “Special tools” (Menu> Setup>
Special tools). For further information
regarding this function, check the
corresponding chapter.
I: Stop refresh display
Definition of an input in order to deactivate
the displays in case of power supply
interruption.