[Direct access: CMD -> 7028->7082]
Parameter
[Direct access]
Setting an input for the monitoring of the car light
via an external sensor.
Query whether the battery is to be monitored.
Determine at which percentage of travels with
registered step errors the user wishes an error
message to be issued to the control centre.
Setting a threshold at which a step error is
detected.
Determine an output for reporting the error
message of a step error.
Query whether the interlocking contacts need to
be checked for opening in the case of both open
car doors as well as open shaft doors.
Waiting time until contacts switch and the test is
conducted. When this value is set to 0, the testing
of the door contact is activated by means of the
door-open limit switch.
Determine an output for filtering an emergency
call (prevention of misuse) while traveling.
To Next Page
Loading...
Need help?
General