Parameter
[Direct access]
“Yes” issues the car position as a binary code. The
remaining configuration parameters for this output
mode are automatically set to “No”.
“Yes” issues the car position as code Gray. The
remaining configuration parameters for this output
mode are automatically set to “No”.
The starting value can be set for all output modes.
“Yes” begins with 1, “No” begins with 0.
Definition of two outputs to control the arrival gong
(Up/Down).
Definition of an output for a gong (up/down).
Definition of two outputs to control the next direction
gong.
Definition of an output which serves to report that
the car doors are trying to close.
Determination of an output which activates a voice
announcement device by triggering.