Klereo Kompact User Manual

Klereo Kompact installation manual V 3
25
5. START UP
5.1 Klereo display
Figure 39. Klereo display unit
The ON or fault indicator light is:
- Steady green when the Kompact control box unit is power supplied and filtering, pH
and disinfectant regulation is possible.
- Flashing red when the Kompact control box unit is power supplied and there is a fault.
Refer to the menu « message » to know the fault.
The filtering indicator light:
- Steady green when the filtering is permanently on (manual ON)
- Flashing green when the filtering is on for a cycle (regulated / time slots or external
command)
- Flashing red when filtering is not possible because of a security or a fault.
- Off when filtering is stopped.
Once the display unit starts up, it displays the following home screen:
Figure 40. Home screen
1. Date and time. Alternately with “messages”
if any.
2. pH and water temperature values
3. Display area for status functions*.
4. Function symbols*
5. Programmed modes and status of
functions*
6. Shortcut to selected function*
*equipment connected to Klereo Kompact
control box (lighting, Filtering, heating if installed
auxiliary)
3
6
2
5
4
1
Browse
LCD screen
Confirm
Back or cancel
Screen selection
key
Shortcut or
screen selection
key
ON or fault indicator
light
Filtering indicator
light

Klereo Kompact Specifications

General

Brand	Klereo
Model	Kompact
Category	Controller
Language	English