Se c tion 7: Sy ste m in te gr atio n
Topics in this section cover integrating AppStat controllers into a
building automation network. These are advanced topics for control
technicians and engineers.
The AppStat can function as a standalone controller or it can be connected to
a BACnet MS/TP network. The topics in this section are reference material for
control technicians or engineers that will be installing and setting up an
AppStat that is connected to a network.
In addition to the information in this section, you will also need the following
information.
Detailed plans and drawings for the building automation system.
Information about the facility LAN including routers, switches, and
network firewalls.
Application Note AN0404A Planning BACnet Networks This document is
available from the KMC Controls partners web portal.
Topics in this section
BACnet objects on page 114
Connecting to an MS/TP network on page 121
Installation, Operation, and Application Guide for AppStat
Revision G 113
To Next Page
Loading...
Need help?
General
