KMC Controls BAC-4000 series - Entering a User Password

Entering a user
password
User functions may require a password consisting of four numbers. Once a
user password is entered it will remain active for 60-seconds after the last
button is pushed.
Procedure Steps Display
1 Starting display
Start at the temperature display.
F
°
70
AUTO AUTO
2 Enter the Level 1
password.
1.
Press any button on the AppStat. The display
changes to the Security User Level display.
2.
Press either the or button to change the
first digit of the password.
3.
Press the Enter button to select the next
digit. Repeat for all four digits.
4.
If the password is correct, the display will
advance to the first menu.
SECURITY
ADMIN LEVEL
0 0 0 0
Enter a user password
Section 3: User functions KMC Controls, Inc.
34 Revision G