Se c tio n 2: Installing the A ppStat
This section provides important instructions and guidelines for installing
the AppStat. Carefully review this information before installation begins.
Installing the sensors includes the following topics that are covered in this
section.
Planning for motion sensing on page 17
Mounting the AppStat on page 18
Connecting inputs on page 20
Connecting outputs on page 24
Connecting power on page 28
Maintenance on page 29
Planning for motion
sensing
For models with a motion sensor mount the AppStat on a wall that will have
an unobstructed view of the typical traffic in the coverage area. When
choosing a location, do not install the sensor in the following areas.
Behind curtains or other obstructions
In locations that will expose it to sunlight or heat sources
Near a heating or cooling inlet or outlet.
For details on the coverage pattern, see Specifications on page 8.
Illustration 2–1 Typical motion sensing coverage area
Installation, Operation, and Application Guide for AppStat
Revision G 17
To Next Page
Loading...
