KMC Controls BAC-4000 series User Manual

Set the time and
date
Setting the time and date requires entering Password 2 which is described in
the topic Enter the commissioning mode on page 40.
Note: If the AppStat is connected to a BACnet network that includes a time service
master, the time and date are automatically set to the network time and
date.
To change the schedule, see the procedure Setting the occupancy schedule on
page 47.
Procedure Steps Display
1 Starting display
1.
Start at the temperature display.
2.
Enter Password 2. The display changes to the
MAIN menu display.
F
°
70
AUTO AUTO
SECURITY
ADMIN LEVEL
0 0 0 0
2 Select the
SCHEDULE menu.
1.
From the MAIN menu , press either the or
button to select SCHEDULE.
2.
Press Enter. The SCHEDULE menu opens.
3.
Choose SET CLOCK and then press Enter.
The SET Clock menu opens.
MAIN
SETPOINT
SCHEDULE
SYSTEM
COMM
ADVANCED
BackEnterExit
SCHEDULE
SET CLOCK
SETPOINT HOLD
ENTIRE WEEK
WEEKDAYS
WEEKEND
INDV DAYS
HOLIDAYS
DelEnterExit
Set the time and date
Installation, Operation, and Application Guide for AppStat Section 4: Commissioning functions
Revision G 45

KMC Controls BAC-4000 series Specifications

General

Brand	KMC Controls
Model	BAC-4000 series
Category	Controller
Language	English