Value objects
BACnet value objects represent setpoints or other operational data in the
AppStat.
Setpoints—The analog value objects in the following table represent
operational setpoints for the AppStat applications. All of the setpoints are
available from the user interface.
Note: Not all objects are present in every model.
Value object Name Description
AV3 ACT_COOL_STPT Active Cooling Setpoint
AV4 ACT_HEAT_STPT Active Heating Setpoint
AV5 OCC_CL_STPT Occupied Cooling Setpoint
AV6 OCC_HT_SPT Occupied Heating Setpoint
AV7 UNOCC_CL_STPT Unoccupied Cooling Setpoint
AV8 UNOCC_HT_STPT Unoccupied Heating Setpoint
AV9 MIN_CL_STPT Minimum Cooling Setpoint
AV10 MAX_HT_STPT Maximum Heating Setpoint
AV11 MIN_STPT_DIFF Minimum Setpoint Differential
AV12 STBY_OFFSET Standby Offset
AV22 DEHUM_STPT Dehumidification Setpoint
AV24 DEHUM_DIFF Dehumidification Differential
AV25 FAN_OFF_DELAY Fan Off Delay
Table 7–6 Analog value objects—Setpoints
Installation, Operation, and Application Guide for AppStat Section 7: System integration
Revision G 117
To Next Page
Loading...
Need help?
General
