Safety
considerations
KMC Controls, Inc. assumes the responsibility for providing you a safe
product and safety guidelines during its use. Safety means protection to all
individuals who install, operate, and service the equipment as well as
protection of the equipment itself. To promote safety, we use hazard alert
labeling in this manual. Follow the associated guidelines to avoid hazards.
Danger represents the most severe hazard alert. Bodily
harm or death will occur if danger guidelines are not
followed.
Warning represents hazards that could result in severe
injury or death.
Caution indicates potential personal injury, equipment
damage, or property damage if instructions are not followed.
Note: Notes provide additional information that is important.
Tip: Provides programing tips and shortcuts that may save time.
Section 1: Introduction to the AppStat KMC Controls, Inc.
16 Revision G
To Next Page
Loading...
