SECTION 2
INSTALLATION
Jan 2001
Page 2-4
05114574
2.2 Installation Requirements (Utilities)
Environment: The SL-IV100hp Waterjet Pump must be installed
indoors. Ambient conditions must not exceed
maximum specifications.
Moving: The SL-IV100hp Waterjet Pump has provisions to be
moved with a forklift. Check weight specifications.
The waterjet pump is top heavy. Avoid situations that
could result in the equipment overturning
Electrical connections must be made by qualified
personnel, and must meet national and local electrical
codes.
2.2.1 Equipment Location/Environment
Space Requirements
: There should be a minimum of 900mm
(36 inches) clearance on all sides of the pump
to facilitate service.
Electrical Wiring: Power supplied to the pump must be in
accordance with national and local electrical
codes. See specifications or requirements.
Control Wiring: Wiring for remote control of the pump must be
in accordance with national and local
electrical codes. The SL-IV100hp Waterjet
Pump has a 24vdc electrical control system
and has provisions for remote operation in the
pump control panel.
ARNING
!
CAUTION
!
To Next Page
Loading...
Need help?
General
