SECTION 10
RECIRCULATION SYSTEM
Jan 2003
Page 10-4
05114657
10.4 Maintenance Overview
During normal operating condition, the oil will be maintained at the correct
operating temperature.
In order to get the best value from the hydraulic system (including the
recirculation system) one should change the filter element when it indicates
that it is time. The hydraulic oil should be changed after 2,000 hours or 1 year
of service (whichever comes first) or whenever a fluid sample indicates that it is
contaminated and beyond being fixed by simply operating the filter.
Parts: Hydraulic Oil:
General service, use Mobil #DTE Heavy Medium, No.
021029 (Part 05022702)
Food service, use AMOCO #FG68EL
(Part 49835762)
Oil with additives such as zinc diophosphate for antiwear
are not recommended because of reaction with water.
Tools: Open End Wrench, 1-1/4”
Rags
Container to collect oil
Oil transfer pump with ¾” hoses. Inlet hose with ½” male
pipe connector, and pump discharge hose with ¾” female
JIC connector.
To Next Page
Loading...
Need help?
General
