User manual - DATA RECORDER and cooperating software
• Wide range of power supply voltage and external sensor power supply
The built-in pulse power supply allows power to be supplied to the unit with
85...
230
...260V AC/DC voltage or 16...
24
...35 AC, 19...
24
...50 DC voltage
(depending on version). Data logger (version with current inputs only) is equipped
with voltage output for powering the sensor and converters: 24V DC ±5% / max.
200mA.
• Legible graphic display
The 128 x 64 points display with a backlight mounted on front of the unit is a big
advantage of the data recorder. It allows the display of trend graphs for each channel
separately. Different operation modes provide the possibility of selecting and
adjusting the method of data presentation depending on the user's requirements.
Data recording intervals are selected by the user from the menu level. Additionally, it
is possible to set the display to show one current value measured for a selected
channel.
• Easy configuration
There are 6 keys on the front of the data recorder that enable the configuration of
the unit. The menu assisted with full text descriptions makes the unit configuration
process quite easy. However, due to a significant number of configured parameters
it is advised to use the attached configuration software for PCs.
7
To Next Page
Loading...