Kobold ZLS-2 - 3.5. “ DEVICE INFORMATION” TAB

User manual - DATA RECORDER and cooperating software
3.5.
“
DEVICE INFORMATION”
TAB
Fig. 3.6
. Device information tab options
This tab has three sections:
•
Device
- this section displays information concerning the device type and current
version of device firmware.
•
Memory
- this section displays information on the unit's memory. The [
Erase
]
button irreversibly deletes memory contents. This section is available for
devices equipped with data logging function.
Memory erase should be done
ONLY IN EXCEPTIONAL SITUATION!
During
normal operation of device (in both mode: "
cyclic
" and "
until full
") memory erasing
IS NOT REQUIRED
.
With memory erasing all measurement results stored in memory
WILL BE
DELETED!
Erase command don't affect data actually downloaded to the PC
.
•
Firmware update
- this section allows updating the device software,
•
USB driver update
- this section allows updating the USB driver.
This section is available for devices equipped with USB
interface.
Detailed description of update can be found in “
UPDATING DEVICE FIRMWARE”
section.
115
i
Erasing
device memory
Updating device firmware