Kobold ZLS-2 - Page 76

User manual - DATA RECORDER and cooperating software
The answer:
ADDR FUNC BYTE C DATA H,L CRC L,H
01 03 02 00 FF F8 04
DATA H, L - displayed value = 255, no decimal point. Decimal point position can be
read from reg. 43h (position of decimal point for channel 1)
4. Read of the registers 1, 2 and 3 in one message (example of reading a number of
registries in one frame):
ADDR FUNC REG H,L COUNT H,L CRC L,H
01 03 00 01 00 03 54 0B
COUNT L - the count of being read registers (max. 32)
The answer:
ADDR FUNC BYTE C DATA H1,L1 DATA H2,L2 DATA H3,L3 CRC L,H
01 03 06 00 0A 00 02 02 80 18 74
DATA H1, L1 - 01h registry (10 – value displayed for channel 1, no decimal point),
DATA H2, L2 - 02h registry (2 – value displayed for channel 2, no decimal point),
DATA H3, L3 - 03h registry (640 – value displayed for channel 3, no decimal point).
5. Setting of name for channel 1 as "Channel 1 "
(example of writing a number of registries in one frame)
ADDR FUNC REG H,L COUNT H,L BYTE C
01 10 00 47 00 05 0A
continue of frame:
DATA H1,L1 DATA H2,L2 DATA H3,L3 DATA H4,L4 DATA H5,L5 CRC L,H
43 68 61 6E 6E 65 6C 20 31 20 7F D0
DATA H1, L1 - 47h registry (43h - character "C", 68h - character "h"),
DATA H2, L2 - 48h registry (61h - character "a", 6Eh - character "n"),
DATA H3, L3 - 49h registry (6Eh - character "n", 65h - character "e"),
DATA H4, L4 - 4Ah registry (6Ch - character "l", 20h - space " "),
DATA H5, L5 - 4Ah registry (31h - character "1", 20h - space " ").
a) The answer (we assume that input current is not out of range):
ADDR FUNC REG H,L COUNT H,L CRC L,H
01 10 00 47 00 05 B0 1F
76