S008769 Rev A 15
Getting Started
1.6.2 Software
The following are BBH’s recommended system requirements for the host PC as they pertain to a
color scanner. These specifications pertain to the Ngenuity Operator Utility (NOU) and Ngenuity
compatible VRS Professional only:
1.7 Installation
WARNING
The scanner weighs approximately 112 pounds (51 kg). Be sure to incorporate the appropriate
manpower (taking into consideration your lifting capabilities) before moving or lifting the
scanner.
For instructions on installing the scanner, refer to the Ngenuity Quick Install Guide (S008842). A
hard copy of the Quick Install Guide is included with the scanner, and an electronic copy exists on
the scanner’s installation resource CD-ROM. If you are unable to retrieve an Ngenuity Quick
Install Guide from these sources, one can be downloaded from www.bbhscanners.com
.
Host PC Operating System
Microsoft
®
Windows
®
Vista Business
a
, Windows
®
XP Professional with SP2, Windows
®
2000
Professional with SP4
a. Microsoft
®
Windows
®
Vista Business 32-bit or 64-bit compatible with USB connection;
Microsoft
®
Windows
®
Vista Business 32-bit only compatible with SCSI connection.
Host PC Minimum Specifications Host PC Recommended Specifications
Intel
®
Pentium
®
D / AMD Athlon™ 2 GHz
Intel
®
Core™2 Duo / AMD Athlon™ 64 x 2
Dual Core, 2.4 GHz or better
HDD: 250 GB HDD: 500 GB
DIMM DDR 2700: 1 GB DIMM DDR 3200: 2 GB
PCI Bus 32-Bit
USB 2.0
Video AGP or PCIe: 128 MB
SCSI Card - Adaptec 29160 Regular and Low Profile
b
b. SCSI is an optional connectivity type for Ngenuity scanners. If using USB to connect your
scanner to the host PC, a SCSI card is not required. For more information on SCSI connectivity,
see ”4.2
SCSI Connection” on page 53 in this manual.
To Next Page
Loading...
