6 S008769 Rev A
Ngenuity Operator Manual
1.4.1 Scanner Front
Ref# Item Name Description
1 Control Panel The control panel allows the operator to manipulate certain scanner
functions directly from the scanner itself. It is comprised of pushbutton
switches, LED indicators, pictogram legends, and text legends (for further
information about the control panel, see ”2.1
Control Panel” on page 17).
2 Feeder Table The feeder table is where the document(s) to be scanned are placed by the
Operator. It can be raised and lowered by the Operator using the Down/
Set and Up buttons (see ”2.1.2
Feeder Table” on page 23) located on the
scanner’s control panel (#1 above
).
3 Cork Pad The cork pad assists in preventing multifeeds by making it easier for the
skimmer rollers to grab one document at a time from a batch to feed into
the scanner. It is a small, rectangular piece of cork that sits in a ‘well’ on
top of the feeder table.
To Next Page
Loading...
