S008769 Rev A 59
Maintenance
5.2.1 Items Needed
The following items are required for performing routine maintenance on your Ngenuity scanner:
• Ngenuity Roller Kit
• Ngenuity Cleaning Kit
-Blower Brush
- Transport Cleaning Sheets
- Roller and Glass Cleaner (to be used on transport rollers and glass items only)
- Lint-free Cleaning Cloths
- Cleaning Wipes (to be used on skimmer and separator rollers only)
- Swabs
N
OTE
Ngenuity scanners use their own Roller and Cleaning kits. The items contained therein are
specific to Ngenuity scanners. To purchase a Ngenuity Roller or Cleaning Kit, go to our on-
line store at www.bbhscanners.com
or call BBH Sales at 1-800-SCAN-494. Kits are also
available for purchase through BBH Authorized Service Providers (ASPs), and Authorized
Spare Parts Resellers (ASPRs). A list of ASPs and ASPRs is available at
www.bbhscanners.com
.
5.3 Maintenance Procedures
The maintenance procedures documented in the following sections should be performed
following the BBH recommended time intervals or sooner if necessary (see ”5.2
Maintenance
Schedule” on page 57 above).
Replace Feed Rollers 600,000 pages 100K - 900K
- Noticeably worn rollers
- Page skewing, multifeeds
and paper jams continue to
occur after cleaning is
performed
Ink Cartridge(s) - only relevant if
optional imprinter(s) installed
Approx. 34,000
pages (can vary
depending on
number of char-
acters per page
and font used,
etc.)
n/a
(factory set)
Poor print quality
Maintenance Recommended Range Symptoms
To Next Page
Loading...
