48 S008769 Rev A
Ngenuity Operator Manual
3.2.2 Document Setup Screen
The Advanced Properties Document Setup screen
contains the following controls: Document Types;
Allow Large Skew; Very Long Documents; Ignore
Holes/Ragged Edges; and Front/Back Negative
Image Enable.
3.2.2.1 Document Types
The Document Types area allows the Operator to
invoke changes in speed, feeding, etc., to
accommodate the needs of various document
types.
Using the drop down menu, the Operator can
choose the following:
• Normal - Standard document types - top transport speed, full
performance mode
• Fragile/Difficult - Lower transport speed - useful for delicate
documents that can easily tear
• Thick or Envelope - Thick paper or envelopes
• Tri-Fold - Tri-fold documents
N
OTE
Document types other than ‘Normal’ may under some circumstances reduce scanner speed.
3.2.2.2 Allow Large Skew
If enabled (box checked), the Allow Large Skew control maximizes image data capture for
documents that are fed into the scanner at a non-parallel angle (highly skewed), helping to
eliminate clipped or missing corners. Auto Orientation and Deskew options are then applied to
the entire image in order to adjust image orientation.
3.2.2.3 Very Long Document
When enabled (box checked), the Very Long Document control adjusts the scanner’s transport
speed in order that the scanner along with the software is able to segment a long document (more
than 40 inches (1016 mm) in length) being scanned into individual images. The size of the
images is determined by the Paper Size setting in the scanning application.
To Next Page
Loading...
