S008769 Rev A 31
Operating Your Scanner
2.2.1.1 Menu - Scanner
Clicking on the Scanner menu displays the following three
selections: “Details”; “Update Firmware”; and “Exit”. The
“Details” and “Update Firmware” selections are only
accessible (not grayed out) if the Ngenuity scanner is
connected to the host PC that the NOU is installed on.
DETAILS
Clicking “Details” from the Scanner menu will
display a dialog window containing version
information for all scanner firmware components,
along with camera information. In addition, the
scanner model identification is displayed in the
dialog window.
N
OTE
The version information contained in the
screen shot (right) is for demonstration
purposes only and should not be used as a
reference for scanners in the field.
The “Details” dialog window also contains 3
buttons, which are: Save As...; Copy to
Clipboard; and Close.
Clicking the Save As... button opens a second dialog window from which the Operator or service
technician can save the details anywhere on the host PC or a network (if connected) as a text file
(.txt).
This function uses the default file path as that of the NOU itself, with a preselected file name of
“BBHScannerModel” (e.g. BBH9125DC). Both of these items (file path and name), can be
changed by the user; however, they both will revert back to their defaults whenever the NOU is
closed and re-started.
N
OTE
In future releases (updates) of the NOU, when launching the utility, instead of reverting to it’s
default, the file path will remember and display the last used (saved to) path. Also, the file
name will include the scanner serial number (e.g. BBH9125DC.txt will become
BBH9125DC<SerialNumber>.txt or BBH9125DC090312140040.txt).
To Next Page
Loading...
