S008769 Rev A 49
Advanced Features
The Very Long Document control does not support the simultaneous use of some of the other
controls offered through VRS ImageControls and Direct Drivers. Below is a table that identifies
those other controls as well as how the scanner and software handles the conflict when an
Operator attempts to use them together.
3.2.2.4 Ignore Holes/Ragged Edges
The Ignore Holes/Ragged Edges control allows the
Operator to adjust the entry and exit sensors so that they
ignore holes on the leading or trailing edge of a document
(e.g. three-hole punched paper), that may cause the
scanner to detect false starting or trailing edges of a
document.
Conflicting Controls Resolution
Single Page Scan The scan is terminated and an error message is displayed. The
Very Long Document control is not supported with single page
scanning. Use the batch scan command.
VRS Administration Utility -
Warning Tab
The document is scanned ignoring the warning conditions that are
set. No error message is displayed.
On Errors QC Mode The document is scanned ignoring the On Errors QC Mode options
that are set. No error message is displayed.
Every Page QC Mode The scan is terminated and an error message is displayed. The
Very Long Document control is not supported with single page
scanning.
First Page QC Mode The scan is terminated and an error message is displayed. The
Very Long Document control is not supported with single page
scanning.
Deskew and Auto Crop The document is scanned ignoring the Deskew and Auto Crop
options that are set. No error message is displayed.
Image Rotation of 90, 180, or
270 degrees
Do not select rotation options if scanning using the Very Long
Document control.
Auto Orientation The scan is terminated and an error message is displayed. For
best results, do not use the Very Long Document control and the
Auto Orientation control at the same time.
Picking Rectangle For best results, do not use the Very Long Document control and
the Picking Rectangle control at the same time.
Automatic Color Detection For best results, do not use the Very Long Document control and
the Automatic Color Detection control at the same time.
Advanced Clarity For best results, do not use the Very Long Document control and
the Advanced Clarity control at the same time.
To Next Page
Loading...
