Kohler CURTIS 3401T User Manual

2 — USING THE 3401T
pg. 11
Return to TOC Curtis Model 3401T – August 2022
3. To change the access level, press the , , , or button.
4. Use the F1–F5 buttons to enter the ve-digit password, which consists of the numbers 1–5. Pressing an
F1–F5 button enters the number that follows the letter “F”: for example, the button enters 2.
To indicate how many characters have been entered, the corresponding circle in the middle of the screen
turns blue when a button is pushed. In the following example, two numbers have been entered:
1
2
3
4 5
>>>Enter 3401T Menu Password
OEM
Tip: To clear the most recently entered number, press the button; the corresponding circle turns
white. To exit the password screen, press the button until the password is cleared, then press the
button again.
5. Press the button to submit the password. If the password is correct, the main menu displays and you
can now view and edit parameters.
If the password screen indicates that the wrong password was entered, press the or button to
clear the password, then repeat steps 3–5.
To exit the menu, press the button.
IMPORTANT: Aer you have nished working with parameters, cycle the keyswitch to clear the password.

Kohler CURTIS 3401T Specifications

Power

nominal voltage	12–96 VDC
minimum voltage	8 VDC
maximum voltage	120 VDC
keyswitch on current	33–207mA
keyswitch off current	25–112mA
LCD heater on current	566–801mA

Operating Environment

operating temperature with LCD heater	–40°C to +70°C
operating temperature without LCD heater	–20°C to +70°C
storage temperature	–40°C to +85°C

Weight and Dimensions

dimensions	160 x 102 x 49.7 mm