Kohler CURTIS 3401T - Ecs Authorization

2 — USING THE 3401T
Curtis Model 3401T – August 2022 Return to TOC
pg. 8
ECS Authorization
If the 3401T is congured to allow only authorized ECS users to access the device, the following
screen is displayed when a user is not logged onto the ECS:
PLEASE OPERATE VIA ECS!
If this screen is visible, log onto the ECS by swiping an RFID tag or entering an ECS user ID and PIN
code on the keypad. If the RFID tag or user ID and PIN code are valid, the home screen is displayed.
Note: To log on with the ECS, the 3401T and the ECS must be in the operational NMT state and the
ECS’s node ID must be specied. If you are logged onto the ECS but the screen shown in the previous
image is displayed, the devices might not be in the operational state.
Aer you log o the ECS, the 3401T displays the screen shown in the above image.