10.4.2 Packaging
—
Cardboard packing with Instapak
®
foam cushion.
—
You can return the plastic portion to the supplier (see "Disposal").
Motor type Packing
Max. sta
-
cking height
Motor type Packing
Max. sta
-
cking height
AKM1 Cardboard 10 AKM5 Cardboard 5
AKM2 Cardboard 10 AKM6 Cardboard 1
AKM3 Cardboard 6 AKM7 Cardboard 1
AKM4 Cardboard 6 AKM8 Pallet 1
10.4.3 Storage
— Climate category 1K4 according to EN61800-2, IEC 60721-3-2
— Storage temperature - 25...+55°C, max. variation 20K/hr.
— Humidity rel. humidity 5% - 95%, no condensation
— Store only in the manufacturer’s original recyclable packaging
— Max. stacking height see table in chapter "Packaging"
— Storage time unlimited
10.4.4 Maintenance / Cleaning
— Maintenance and cleaning only by qualified personnel
— The ball bearings should be replaced after 20,000 hours of operation under rated
conditions (by the manufacturer).
— Check the motor for bearing noise every 2500 operating hours, respectively each
year. If any noises are heard, stop the operation of the motor, the bearings must be
replaced (by the manufacturer).
— Opening the motor invalidates the warranty.
— If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or
spray
10.4.5 Repair
Repair of the motor must be done by the manufacturer. Opening the motor invalidates the
warranty. Send the motor to:
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
10.4.6 Disposal
In accordance to the WEEE-2002/96/EG-Guidelines we take old devices and accessories
back for professional disposal, if the transport costs are taken over by the sender. Send
the devices to:
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
English - 38 Servomotors AKM
Safety 04/2013 Kollmorgen
ENGLISH
To Next Page
Loading...
Need help?
General
