Kollmorgen AKM Series - Washdown Food; Tested and Confirmed Properties with Respect to Cleaning Agents

12.6.2 Washdown Food
AKM^^^-^^^^^^-^F Washdown Food without flange coating
AKM^^^-W^^^^^-^F Washdown Food with flange coating of IEC A flange
The surface of the Washdown food motor has passed all tests as per FDA GlobalMigrati
-
on for indirect contact with foodstuffs. Any direct contact with unpacked foodstuffs is not
permitted.
Application Area:
Foodstuffs and drinks industry, no direct contact with unpacked
foodstuffs
Example
Cutting, packing and filling without direct contact with food-
stuffs. Motor laterally or below the food
.
Standards:
UL, CE, RoHs, FDA
Surface:
white coating
Immunity:
against tested industrial cleaning agent (see page 47), corro-
sion-proof
Degree of protection
:
IP67
Shaft:
Stainless steel
Rotary shaft seal:
PTFE as per FDA
Lubricant:
food-grade as per FDA
Connector:
Stainless steel, smooth surface
Screws:
Stainless Steel
Name plate:
Engraved, additional nameplate in the package
Size:
AKM2 - AKM6
12.6.3 Tested and confirmed properties with respect to cleaning agents
The testing lab of ECOLAB Deutschland GmbH tested the resistance of the Washdown
and Washdown Food surfaces to the following industrial cleaning agents:
— P3-topactive DES
— P3-topactive LA
— P3-topax 56
— P3-topax 66
— P3-topax 91
In the process, the surfaces were immersed in the respective cleaning agent at room
temperature for 28 days. This corresponds to approx. 2,500 cleaning cycles with
15-minute contact each with the cleaning agent or 1,500 cleaning cycles with cleaning
and subsequent disinfection.
The certificates are located in our Product WIKI on the Approvals
page.
Kollmorgen can only give a guarantee for the motor's lifecycle if the tested cleansing
agents are used. Any cleansing agent other than those mentioned above can be tested
by Kollmorgen upon request and, if appropriate, be approved.
Servomotors AKM English - 47
Kollmorgen 04/2013 Technical Description
ENGLISH