Kopp Labormaster HCT 3000 User Manual

Test results
The integrated measurement data acquisition records the data without any additional hardware
Visualization:
Interfaces:
measured values determined by the LABORMASTER 3000.
The control panel with TFT display is used to set and monitor the test
parameters: top and bottom sealing temperature, sealing and cooling time,
take-off speed and to display the set or achieved sealing force.
Control panel with The central control panel with TFT color display enables simple and
- what
USB storage media can be connected for data exchange via the USB interface.
Both the CSV files and the screen printouts can be easily
transferred to a PC.
The USB and Ethernet interfaces are located under the protective cover on the
left side of the device.
TFT color display: targeted operation, as well as visualization and evaluation
Measurement
data acquisition:
Due to the variety of manufacturers and products, no guarantee can be given
for the functioning of USB mass storage devices or keyboards (except for items
that are tested and sold by the control manufacturer B&R).
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
In addition, basic presettings are carried out on the control panel:
The curve progression (force/time curve) is shown on the display.
Page - 17 -
- Choice of menu language: German / English / French / Italian / Turkish
- Contrast adjustment
Up to 10 curves can be placed on top of each other. A cursor function is
available for evaluating individual measuring points. A zoom function
makes it easier to view the details.
After the test, the maximum value of the seal seam strength determined,
the time of the maximum value, the duration of the tensile test and the average
seal seam strength are shown on the display of the Labormaster 3000.
You can easily log the curve view, parameters, test description
and results on a screen printout at the push of a button.
The curve progression (force/time curve) is shown on the display.
Packaging systems
Ulmer Straße 51 – 53
Willi Kopp e. K
http://www.kopp-online.de
E-Mail: sales@kopp-online.de
Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Fax +49.7153.9510-100D-73262 Reichenbach/Fils
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 17 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English