Kopp Labormaster HCT 3000 User Manual

Note: Pressing the delete key DEL deletes the character to the left of the cursor.
To select the curve you want to save, go to the “Curve evaluation” or “Result display” screen. Enter
the number of the corresponding curve using the number key and confirm your entry with ENTER.
5.3.17.5. Open file function
Only CSV files created on the Labormaster 3000 can be read.
To make comparisons, you can visualize the CSV files saved with the laboratory master as curves on the laboratory
master.
Use F5 to access the file functions.
Be sure to confirm the name you entered with ENTER before saving.
Page - 45 -
Note: If all 10 serial numbers have already been assigned curve data, no further data can be assigned
“Open existing file”. The curve is included in the curve evaluation
Curve can be read in. First delete one of the curves (Delete curve / measurement data
p.39).
The measured values determined, the most important sealing parameters and the test description can be saved in CSV
format. The curve files can be archived for later use on the laboratory master or for distribution. CSV files can be read
easily and quickly into common spreadsheets (e.g. Excel) or special evaluation programs. Here the data can be
prepared and further processed.
A file name must always be assigned!
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Important!
Then press F3 screen
displayed).
5.3.17.4. Save curve/measurement data as a CSV file function
"Save file". The file will be stored in active storage (see above in
Use the TAB key to move the cursor (highlighted in blue) to the “Files” screen area and then use the ÿ/ÿ arrow keys to
move to the desired file. Confirm your selection with the ENTER key.
Then press F2 to take
over.
Use the TAB key to move the cursor (highlighted in blue) into the “Edit” input field and assign a file name. To do this, use
the connected PC keyboard. Confirm the file name with the ENTER key.
Enter the file functions. Use the TAB key to move the cursor (highlighted in blue) to the “Folder” screen area and then use
the arrow keys ÿ/ÿ to the desired folder.
Confirm your selection with the ENTER key.
Packaging systems
D-73262 Reichenbach/Fils Fax +49.7153.9510-100
Phone +49.7153.9510-0
Inh. Ludwig P. Goals
E-Mail: sales@kopp-online.de
Willi Kopp e. K
http://www.kopp-online.de
Ulmer Straße 51 – 53
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 45 of 82, March 1, 2016
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English