Kostal PLENTICORE plus - Page 95

95
4
© 2018 KOSTAL Solar Electric GmbH
Operation and operating the device
Settings/information menu
Configuration of the inverter and additional components
(e.g. energy meter, battery etc.) is performed under
Settings/information.
n
Basic setting
Set the general parameters of the inverter.
Parameter Explanation
Language Selection of menu language
Inverter name Enter the inverter name. The char-
acters a–z, A–Z, 0–9 and "-" are
permitted for the name change.
Spaces or special characters are not
possible. The browser connection to
the Webserver can be established
with the new name following the
name change. Access with the serial
number remains possible.
Date/time Enter the time and date.
Set the time zone
(e.g. UTC (+1:00) for CET)
Activate/deactivate or automatic
determination of time. The NTP server
can be configured via the Webserver.
2
3
4
5
6
7
8
9
10
11
12
13
1