CONTENTS
2
www.krohne.com 09/2020 - 4006413102 - TD OPTISONIC 6300 V2 R02 en
OPTISONIC 6300
1 Product features 4
1.1 Introduction ...................................................................................................................... 4
1.2 Variants............................................................................................................................. 6
1.3 Features............................................................................................................................ 9
1.4 Options............................................................................................................................ 11
1.5 Measuring principle........................................................................................................12
2 Technical data 13
2.1 Technical data................................................................................................................. 13
2.2 Dimensions and weight .................................................................................................. 25
2.2.1 Housing ................................................................................................................................. 25
2.2.2 Clamp-on sensor rail............................................................................................................ 26
2.2.3 Mounting plate of field housing ............................................................................................ 28
2.2.4 Mounting plate of wall-mounted housing ............................................................................ 28
3 Installation 29
3.1 Intended use ................................................................................................................... 29
3.2 Pre-installation requirements ....................................................................................... 29
3.3 General requirements.................................................................................................... 29
3.4 Installation and safety instructions................................................................................ 29
3.5 Installation conditions ....................................................................................................31
3.5.1 Inlet, outlet and recommended mounting area ................................................................... 31
3.6 Horizontal (long) pipes ................................................................................................... 32
3.7 Bends in 2 or 3 dimensions ............................................................................................ 32
3.8 Bends .............................................................................................................................. 33
3.9 T-section......................................................................................................................... 34
3.10 Open feed or discharge ................................................................................................ 34
3.11 Position of pump........................................................................................................... 34
3.12 Position of control valve ............................................................................................... 35
3.13 Pipe diameters and sensor rail(s) construction .......................................................... 35
3.14 Installation instructions for X mode configuration...................................................... 36
3.15 Installation for energy measurement .......................................................................... 37
3.16 Installation of the converter ......................................................................................... 38
3.16.1 Pipe mounting ..................................................................................................................... 38
3.16.2 Wall mounting ..................................................................................................................... 39
3.16.3 Turning the display of the field housing version ................................................................ 41