Settings
335
Pos: 109.148 /BA/ Wartung/Schn eidwerk/Schn eidwerk anheben zÜ @ 279\ mod_1405063 605495_78.docx @ 2147011 @ @ 1
Raising the cutting system
Pos: 109.149 /BA/ Wartung/Schn eidwerk/Schn eidwerk anheben: M edium–Ele ktronik @ 356\ mod_143869 8518696_78.doc x @ 2654926 @ @ 1
Medium electronics
• Actuate the control unit ( ) on the tractor until the cutting unit has been fully
raised.
Pos: 109.150 /BA/M aschinenbesc hreibung/Maschi nenübersic ht/Großpackenpres sen/Komfort- Elektroni k @ 61\mod_129922304 6976_78.docx @ 570919 @ @ 1
Comfort - Electronic
Pos: 109.151 /BA/I nfo-Center/CC I-ISOBUS-Ter minal/CCI-BiG Pack/Funktion stasten F1 bis F 12Messerbal ken freischalt en @ 352\mod_ 143739267290 9_78.docx @ 2 634130 @ @ 1
Release
• To release the blade bar, press .
The symbols , are shown on the display.
Pos: 109.152 /BA/I nfo-Center/CC I-ISOBUS-Ter minal/CCI-BiG Pack/Funktion stasten F1 bis F 12Messerbal ken heben @ 35 2\mod_14373 92869065_78. docx @ 26341 61 @ @ 1
Raising
• To raise the blade bar, press and hold .
Pos: 109.153 /BA/ Wartung/Schn eidwerk/Schn eidwerk anheben: Komfort-Ele ktronik Über die Tasten @ 2 79\mod_1405 064009645_78. docx @ 2147105 @ @ 1
Using the pushbuttons on the machine
• To raise the blade bar, press the pushbutton until the blade bar is fully raised.
Pos: 110 /Layou t Module /---------------Seitenumbr uch---------------- @ 0\mod_11961753 11226_0.docx @ 4165 @ @ 1
To Next Page
