Krone Big Pack 1270 - Electrical Twine Empty Display for Lower Thread

Machine Description
67
Pos: 55.71 /Übersc hriften/Überschrif ten 2/P-T/S Schneid werk @ 20\mod_12 38593156760 _78.docx @ 2235 60 @ 2 @ 1
5.11 Cutting system
Pos: 55.72 /BA/Ma schinenbeschr eibung/Sch neidwerk/Allgem eines Schneidwer k BigPack ohn e Blindmesser @ 91\mod_1 32670576401 4_78.docx @ 78 0502 @ 3 @ 1
5.11.1 General
The Big Pack XC has a cutting system with a cutting cylinder and fixed blades. Cutting allows
for improved further processing of the big pack and makes it possible to increase the density of
baled material. The blades can be swivelled out of the conveyor channel from the tractor
hydraulically if there are blockages. Each blade is separately protected against overload. The
machine can also be used without blades. The cutting cylinder then takes over the function of a
conveyor between the pick-up and the pre-baling channel.
Pos: 55.73 /Übersc hriften/Überschrif ten 3/P-T/S Schnittlänge @ 280\mod _1405513151074_ 78.docx @ 21 54911 @ 3 @ 1
5.11.2 Cutting Length
Pos: 55.74 /Ab kürzungen /Abkürz ungen sprac hneutral/Großp ackenpresse/Bi G Pack 890 HS XC @ 279\ mod_1405416 487213_0.doc x @ 2151740 @ @ 1
BiG Pack 890 HS XC
Pos: 55.75 /BA/Ma schinenbeschr eibung/Sch neidwerk/Schnittl änge BigPack Bi G PACK 890 H S / 870 HDP mit 16 Messer @ 192\mod_1 38208082434 5_78.docx @ 1 637759 @ @ 1
The cutting system can be fitted with max. 16 blades.
The blades are subdivided into two groups (upper blade control system and lower blade control
system).
The theoretical cutting length is, with full equipping, 44 mm. The cutting length is determined by
the number of used blades and the position of blade control systems.
In case of full equipping, 0, 8, 8 or 16 blades can optionally be set via the upper and the lower
blade control system.
Pos: 55.76 /Ab kürzungen /Abkürz ungen sprac hneutral/Großp ackenpresse/Bi G Pack 1270 XC HS / 129 0 XC HS / 1290 HD P XC HS @ 1 92\mod_13 82081008983_0.d ocx @ 163778 8 @ @ 1
BiG Pack 1270 HS XC / BiG Pack 1290 HS XC / BiG Pack 1290 HDP HS XC
Pos: 55.77 /BA/Ma schinenbeschr eibung/Sch neidwerk/Schnittl änge BigPack mit 26 Messer @ 192\mod_13 82079661221_ 78.docx @ 1 637730 @ @ 1
The cutting system can be equipped with max. 26 blades.
The blades are subdivided into two groups (upper blade control system and lower blade control
system).
The theoretical cutting length is, with full equipping, 44 mm. The cutting length is determined by
the number of used blades and the position of blade control systems.
In case of full equipping, 0, 13, 13 or 26 blades can be set via the upper and lower blade control
system.
Pos: 55.78 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1