Krone Profi Liner - Page 81

SUPERSTRUCTURE OPERATION
Operating instructions • Semitrailer • 505369471-04 • 02/2019
81
3
4
1
2
Fig.6-26: Version 1 channel rail
1 Curtain loop (option)
2 Outside of the curtain
3 Curtain handle
4 Channel rail
► Lift the channel rail together with the
curtain using the curtain handle in-
stalled on the channel rail.
► Slide the curtain forwards.
ð The channel rail is unhooked.
► Slide the curtain to the rear.
ü The side curtain is opened at the front.
Closing the side curtain at the front
(version1)
► Slide the curtain forwards.
1
2
Fig.6-27: Version 1 tension shaft support
1 Tension shaft support
2 Bracket
► Lift the channel rail together with the
curtain using the curtain handle in-
stalled on the channel rail.
► Slide the curtain forwards.
► Guide the curtain at the front below the
sealing lip using the channel rail.
► Attach the channel rail to the tension
shaft support.
► Lift the channel rail together with the
curtain onto the bracket.
► Tighten the curtain using the rear cur-
tain tensioning device (see "6.2.5 Rear
curtain tensioning device", pg.82).
► Secure the closed and longitudinally
tensioned curtain with the curtain
buckles (see "6.2.2 Curtain buckles",
pg.75).
► If necessary, install the curtain rope
(see "6.2.6 Curtain rope bracket", pg.84).
ü The side curtain is closed at the front.
Opening the side curtain at the front
(version2)
► If necessary, remove the existing cur-
tain rope.
► Release the curtain buckle (see "6.2.2
Curtain buckle", pg.75).
► Release the curtain using the rear cur-
tain tensioning device (see "6.2.5 Rear
curtain tensioning device", pg.82).
3
1
2
Fig.6-28: Version 2 channel rail
1 Channel rail
2 Outside of the curtain
3 Curtain handle