Dear customer,
You have now received an operating manual for the KRONE
product which you have purchased.
This operating manual contains important information for the pro-
per use and safe operation of the machine.
If this operating manual should for any reason become wholly or
partially unusable, you can obtain a replacement operating
manual for your machine by stating the number given on the other
side.
EC Declaration of Conformity
We,
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Krone Round Baler
Type / Types: Round Pack 1250/Round Pack 1250 MultiCut,
Round Pack 1550/Round Pack 1550 MultiCut
to which this declaration refers is in compliance with the relevant provisions of
EC Directive 2006/42/EC (Machinery) and EC Directive 2004/108/EC (EMC)
The signing Managing Director is authorised to compile the technical documents.
Spelle, 15.04.10
Dr.-Ing. Josef Horstmann
(Managing Director, Design and Development)
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
Year of manufacture: Machine No.:
To Next Page
Loading...
