Krone Round Pack 1550 - Inserting Twine

V - 13
Basic Settings and Operation
5.6.4 Inserting Twine
The twine box can hold up to 10 rolls of twine (1).
Threading the twine
Before knotting the roll of twine (1), thread the twine (3)
through the corresponding twine guide (2).
end of with start of
roll roll
1 4
4 7
7 8
8 10
2 3
3 5
5 6
6 9
The rolls of twine are connected as follows:
• Thread the twine downwards through the twine guides
(1) and the front bore holes (2) inside the twine box.
• Thread 1 through the back bore hole.
• Thread 2 through the front bore hole.
thread 1
(back)
thread 2
(front)
KR-1-009
RBV04150
2
3
1
10 7 4 1
2
3
5
6
8
9
RBV00241
RBV04142
1
1
2
Attention!- Contamination of tying twine
as well as the tying mechanism by oil
and grease
Effect: Damages to the machine and
problems with unrolling of the tying
twine
• Twine, twine tensioner and eyes must
not be contaminated with oil or
grease.
• Those parts of the tying device the
tying twine or net will rum through,
must not be contaminated with oil or
grease.