Krone Round Pack 1550 - Technical Data Round Pack 1250; Round Pack 1250 Multicut

I - 3
General Information
1.2.8 Technical Data Round Pack 1250 / Round Pack 1250 MultiCut
Type Round Pack 1250 Round Pack 1250 MultiCut
(without cutting system) (with cutting system)
Axle single axle tandem axle single axle tandem axle
Pick-up (width) 1600 1950 1600 1950 1600 1950 1600 1950
Width approx. 11.5/80-15 2460 2570 2735 2460 2570 2735
15.0/55-17 2560 2570 2840 2560 2570 2840
19.0/45-17 2670 2950 2670 2950
500/50-17 2700 – 2700 –
Permissible weights see information listed on the identification plate
Track width 2150 2430 2150 2430
Tyres 11.5/80-15.3/10 PR
15.0/55-17/10 PR
19.0/45-17/10 PR
500/50-17/10 PR – 500/50-17/10 PR –
Length approx.4200
Height approx. 2250
500/50-17 2300
Pick-up width(DIN) 1950
Bale dimensions diameter approx. 1250
width approx. 1200
Power requirement approx. 36 kW (50 PS)
Drive speed (PTO shaft) 540 r.p.m
Max. permissible operating
pressure of the hydraulic system 200 bar
Lighting 12 Volt - 7 pin plug (DIN)
Control System 12 Volt - 3 pin plug (DIN)
Twine
Open air storage synthetic twine 400 - 600 m / kg
Indoor storage sisal twine 150 - 300 m / kg
Net
Width 1250 ± 5mm
Sleeve length 1250 - 1270 mm
Sleeve diameter ø 75 - 80 mm
Roll diameter max. 310 mm (3000 m roll)
Overload protection (PTO shaft)
Friction clutch 1300 Nm –
Cam-controlled linkage 1300 Nm 1500 Nm
540 r.p.m.
Electrical supply