III - 5
Before and After Use
3.3 Road Driving
• Driving on public roads is permitted only if the bale chamber is empty and locked.
• If the round balers is not equipped with brakes, the weight of the tractor must be at least
equal to the empty weight of the baler.
The empty weight of the baler is listed under “Technical Data”.
• Permissible top speed: 40 km/h / 30 km/h.
• Carrying passengers on the round baler is not permitted.
• Check the road safety of the round baler before driving on public roads. In particular, check
the lighting equipment and tyres, make sure that the protective plates have been secured,
the pick-up is secured in the raised position and that the bale chamber is locked.
• Before starting, ensure that you have perfect visibility on and around the tractor and the
round baler.
Lighting Equipment
• Connect the lighting unit to the tractor electrical system.
• Check and clean the tail lights (1) and rear reflectors (2).
• Check and clean the lateral reflectors.
Jack stand
• Shut off voltage supply to comfort controls
• Check that the jack stand (1) is in transport position.
Pick-up
• Check that the pick-up has been secured in the
raised position.
• Secure pick-up, if necessary.
• Slacken the nuts (2).
• Slide the low limiter (1) forwards.
• Tighten nuts (2).
• Adjust both sides.
• Switch off the Controls.
CPB00100
1