Precision Seed Drills
148
MAXIMA 2 M
Optional equipment
Maintenance
Emptying the hopper
- Position a container close to the emptying hatch.
- Push lever (1) upwards to open the emptying hatch.
- Empty the seed box completely.
- Close the hatch.
- Empty transfer tubes (by shaking them).
Cleaning the machine
Metering units:
- Remove plug (1).
- Clean the venturi using compressed air.
- Reinstall plug (1).
- Repeat procedure on all other venturis.
Lubrication
Check (Each time the machine is used)
Check wear of foils to prevent sealing loss and
overdosage.
Do not clean the microgranulator with water.
Clean the unit using compressed air.
Spray biodegradable oil on the outside of the
microgranulator to protect it from oxidation
during the storage period.
To Next Page
Loading...
