Precision Seed Drills
166
MAXIMA 2 M
Optional equipment
Maintenance
Emptying the hopper (At the end of each day of
work or for long parking periods)
To empty hopper partially:
- Place a container (1) underneath the hatch that does
not supply a metering unit.
- Open hatch.
To fully remove fertilizer in the metering units:
Remove the metering unit assembly to clean the
machine completely.
- Disengage the fertilizer.
• Remove lynch pin (1).
• Slide spacer (2) to free distribution drive shaft.
Fertilizers used can cause tool corrosion and
fast deterioration.
Some fertilizers are sensitive to humidity and
can build blocks during a long machine
parking period. Fully empty hopper and
rotate meterings units to empty the grooves.
To Next Page
Loading...
