Instructions for work
Precision Seed Drills
MAXIMA 2 M
63
Fitting the seed ejector
When the machine is used with disks with only one row
of holes, the ejector BNB0083 (1) must be fitted.
Fitting the seed flow reducer
When disks are not fitted with agitator blades, install
spacer BNB0048 (1).
When the disks are fitted with agitator blades, spacer
BNB0048 (1) must be removed.
This ejector must always be fitted whatever
the seed variety.
The agitator blades fitted on the disk enable
preventing seed bridging in the casing.
Spacer BNB0048 stops small seeds from
flowing freely through the groove.
To Next Page
Loading...
