KUHN MAXIMA 2 M - Lubrication

Precision Seed Drills
190
MAXIMA 2 M
Maintenance and storage
3. Lubrication
The pictorials show the points to be greased (Part
no. 099054002).
Clean grease nipples before greasing.
 PTO shaft
Primary PTO shaft
- Every 8 hours:
• U-joints (1).
• transmission tube (2).
• guide rings (3).
Lubricate with multi-purpose grease grade
NLGI 2.
Lubricate with all purpose oil S 6994 EP90.