Instructions for work
Precision Seed Drills
MAXIMA 2 M
87
Seeding unit high and low position
Setting the seeding unit in high position
- Disengage the unit using knob (1).
- Position spring (1) behind part (2).
- Lock (3) comes into contact with stop (4).
Never lift a seeding unit using the hopper
assembly in order not to damage its link with
the distribution.
For safety reasons forbidding to handle
loads exceeding 25 daN (56.20 lbf) by hand,
the seeding unit must be adjusted with the
machine coupled to the tractor and in raised
position.
The high position setting of the seeding units
enables sowing on 1 row out of 2.
To Next Page
Loading...
