Instructions for work
Precision Seed Drills
MAXIMA 2 M
91
Hoppers
Hopper filling
- Open the hopper cover (1).
- Fill sowing unit hoppers in order to have
approximately equal seed quantity in all hoppers.
- After filling, close hopper cover.
- Repeat procedure for each hopper.
Emptying the hoppers
When seed variety is changed, or at the end of the
season, it is important to fully empty the hoppers.
- Position a container close to the emptying hatch.
- Position funnel (2) underneath emptying hatch (1).
- Pull emptying hatch handle (1).
- Repeat procedure for each hopper.
Lower the machine on the ground.
Before filling:
- Check that there are no foreign bodies in
the hoppers.
- Check that distribution disks are in the
proper position.
- Check that distribution emptying
hatches are closed.
Each hopper has a capacity of 52 L (14 US gal).
To Next Page
Loading...
