Putting into service
Precision Seed Drills
MAXIMA 2 M
37
The tractor PTO stub must rotate at a speed of 470 min
-1
.
Fitting a pull bar
- Fit pull bar (1) on lower links (2).
- Fit spacers (3).
- Insert and lock lynch pins (4).
Belt and pulley assemblies are available to adapt
the blower speed to the tractor PTO speed.
- 540 min
-1
pulley and belt unit: Kit
no. 1676737
- 870 min
-1
pulley and belt unit: Kit
no. 1676731
- 1000 min
-1
pulley and belt unit: Kit
no. 1676738
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded:
See section:
- Safety / Safety instructions /
Precautions when driving on public
roads.
- Appendix.
The tractor must be fitted with lower link
stabilizers.
To Next Page
Loading...
