KUHN MAXIMA 2 M - Coupling and Uncoupling; Description of Coupling Elements; Preparing the Tractor

Precision Seed Drills
36
MAXIMA 2 M
Putting into service
3. Coupling and uncoupling
 Description of coupling elements
The machine is equipped with:
- 1 PTO shaft 1 3/8’’ - 6 splines.
- 1 3-pin socket.
- An electric 7-pin plug for the signalling equipment.
- 2 hydraulic hoses to supply the side marker cylinders.
 Preparing the tractor
The machine adapts to tractors fitted with a 3 point
linkage category 2.
The tractor must be fitted with a double acting hydraulic
outlet.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
- Filling auger.
- Hydraulic blower drive.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
- Filling auger.
- Hydraulic blower drive.