EasyManua.ls Logo

Kurzweil K2661 - The MISC Page; Preampresp; Leakage; Leakmode

Kurzweil K2661
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program Mode and the Program Editor
The MISC Page
6-57
The MISC Page
The MISC page contains an assortment of control parameters, including Leslie speed control
and vibrato/chorus selection.
EditProg:MISC|||||||||||||||||||||||||||
PreampResp:On|||||||VolAdjust|:21dB|||||
Leakage|||:-88.0dB||BendRange|:0ct||||||
LeakMode||:TypeA||||Sustain|||:On|||||||
SpeedCtl||:Slow|||||Sostenuto|:On|||||||
VibChorCtl:On|||||||||||||||||||||||||||
VibChorSel:Chor3||||||||||||||||||||||||
<more||OUTPUT||||||||MISC|||EQ|||||more>
PreampResp
Set this parameter On or Off to enable or disable the preamp+expression pedal part of the KB3
model. Turning this On (the default) makes KB3 programs function like stock organs. The
expression pedal in this case is more than a volume pedal; it actually functions like a “loudness
control,” varying the frequency response to compensate for the ear’s sensitivity at different
volumes. In addition, the preamp provides a deemphasis curve to compensate for the built-in
tone wheel volume preemphasis. Turning preamp response Off emulates organs that have been
modied to have a direct out (before the preamp and expression pedal).
Leakage
Controls the level of the simulated crosstalk and signal “bleed” of adjacent tone wheels in the
model. This is provided to help “dirty up” the sound to make it a bit more realistic. A setting of
-96 dB gives the purest tones; other values add more simulated leakage. This level is scaled by
the drawbar levels, as well as the expression pedal level.
LeakMode
Selects between different leakage models, determining which leakage harmonics are
emphasized. TypeA provides an overall tone wheel leakage, with all tone wheels leaking a small
amount. TypeX, TypeY, and TypeZ emulate different degrees of drawbar leakage, where the
leakage components correspond to the nine drawbars, instead of all the tone wheels.
Parameter Range of Values
Preamp/Expression Response Off, On
Leakage -96.0 to 0.0 dB, in .5-dB increments
Leak Mode None, Type A, Type X, Type Y, Type Z
Speed Control Slow, Fast
Vibrato/Chorus Control Off, On
Vibrato/Chorus Type Selection Vib1, Vib2, Vib3, Chor1, Chor2, Chor3
Volume Adjust -96 to 96 dB
Bend Range -7200 to 7200 Cents
Sustain Off, On
Sostenuto Off, On

Table of Contents

Other manuals for Kurzweil K2661

Related product manuals