Kurzweil K2661 - Soft Buttons in the Save Selection Dialog; Saving Individual Objects; Shortcuts When Saving Objects

To Next Page

To Previous Page

Disk Mode

Saving Files

13-25

Everything ﬁles consist of the Master ﬁle parameters and every other RAM object. Saving an

Everything ﬁle will literally save everything in RAM, including samples, into a single ﬁle.

Soft Buttons in the Save Selection Dialog

The meaning of the soft buttons in the “Save selection” dialog is as follows:

Export Save a sample or a song in an exported ﬁle format (that is, AIFF, WAVE,

MIDI Type 0 or Type 1). This feature is described in Importing and Exporting Data

Using Standard File Formats on page 13-72

Macro Save entries from the current macro table as a macro ﬁle (.MAC). This soft button is

displayed only if macro ﬁle recording is on.

Object Save selected objects from the K2661’s RAM.

NewDir Create a new directory on the current disk, and return to this dialog afterwards.

This is described previously in Creating Directories on page 13-11.

OK Save all the objects from the highlighted bank (for example, 200...299), and

optionally also save dependent objects.

Cancel Exit from the Save function.

Export (page 13-72), Macro (page 13-41), and NewDir (page 13-11) are all explained elsewhere

in this guide. This section will describe the process of saving K2661 objects into K2661 format

disk ﬁles.

Saving Individual Objects

You can select any group of objects in the K2661’s RAM for saving into a single ﬁle.To save

individual objects, from the above dialog, press Object. The K2661 will display a scrollable list

of all the objects in RAM, very similar to the display for the Load Object feature (described

previously):

Func:SAVE|||||Sel:0/8||||||||Index:|||1

|||||||||||||||||||||||||||||||||||||||

Sample||500|Lo|Vocal||||||||A|3S|||250K

Sample||501|Hi|Vocal||||||||G|4S|||179K

Keymap||500|VocalsMap||||||||||||||176|

Program|500|Dry|Vocals|||||||||||||270|

Select||Next|||Type|||Multi||OK||Cancel

The procedures for saving objects are essentially the same as the procedures described on

page 13-14 for loading objects.

Shortcuts when Saving Objects

Select All/Deselect All

Selecting or deselecting all of the objects at once can be done with the following double-presses

(two front-panel buttons simultaneously pressed):

• Left/Right cursor double-press: Select All Objects

Other manuals for Kurzweil K2661