Setup Mode and the Setup Editor
The Setup Editor
7-5
Table 7-2 gives you a quick visual reminder of how zones behave depending on their status.
Remember that any changes you make to zone status in Setup mode are temporary; as soon as
you select another setup, that setup’s programmed zone status takes over. To change a setup’s
zone status permanently, use the Setup Editor (see Status on page 7-8).
The Setup Editor
From Setup mode, press the Edit button to enter the Setup Editor, where you can make changes
to the currently selected setup. Use the soft buttons to select the various Setup-editor pages. The
upper line of each page displays the usual mode reminder, as well as the current Setup-editor
page, and the current zone. Use the Chan/Bank buttons to select one of up to eight different
zones, each having its own set of Setup-editor pages.
The parameters on the Setup-editor pages define what each of a setup’s zones sends—both to
internal programs and to the MIDI Out port. They also determine how the K2661 responds to
MIDI signals received from a MIDI controller connected to the K2661’s MIDI In port (when the
Local Keyboard Channel matches the transmit channel of your MIDI controller).
The display diagrams you see in this chapter show the default values for setup 97 ControlSetup.
LED Color
Zone
Status
Data Generated by Zone
Notes Controllers
Program
Number
Entry and
Exit Values
Red Soloed
✔✔✔✔
Green (no others are red) Active
✔✔✔✔
Green (another is red) Backgrounded
✔✔
Orange Muted
✔✔
(Off) Empty
Table 7-2 Zone Status in Setup Mode
To Next Page
Loading...
