Kurzweil K2661 - The KDFX and FXMOD Pages; The COMMON Page; Song

Setup Mode and the Setup Editor
The KDFX and FXMOD Pages
7-33
The KDFX and FXMOD Pages
These are the same seven effects-control pages that we discussed in Chapter 6 (beginning on
page 6-44). They enable you to define the studio and FXMods for all zones in the setup. As long
as the FX Mode parameter is set to Auto or Setup, the values you set on these pages apply to all
zones in the setup. If FX Mode is Master, all programs and setups use the studio specified on the
Effects-mode page.
The COMMON Page
The COMMON page determines what song, if any, becomes current when you select a setup,
and how song playback is synchronized. It also sets the operational mode for the buttons above
the programmable sliders.
EditSetup:COMMON|||||||||||||||All|Zones
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Song||:O|None|||||||||||||||Sync|:Off|||
SngCtl:Setup||||||||||||||||||||||||||||
Mutes|:Zone|Mutes|||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
<more|||||||||COMMON|ARPEG||RIBCFG|more>
Song
You can link a song to the current setup, using the Song parameter. Select any existing song (or
0 None if you don’t want a song associated with the setup). The song 1 New Song is a blank
template that contains no notes (unless you’ve saved 1 New Song without renaming it).
Parameter Range of Values Default
Switch Type
Momentary, Toggle, Note Momentary,
Note Toggle
PSw1: Toggle
PSw2: Toggle
Destination MIDI Control Source list or C –1 to G9
PSw1: ArpSw
PSw2: MIDI 29
On 0–127 127
Off 0–127 0
Entry Value None, 0–127
PSw1: None
PSw2: Off
Exit Value None, 0–127 Off
Parameter Range of Values Default
Song List of existing songs 0 None
SngCtl Song, Setup Setup
Sync: Off, On Off
Mutes Zone Mutes, KB3 Control Zone Mutes