Disk Mode
Macros
13-41
example, if you end up doing a lot of selecting of samples, or of dependents at various levels, the
parameters will stay set up the way you left them as you move from function to function (for
example, from Copy to Delete to Save, etc.).
“Select Dependents” mode is very useful not just for saving dependents, but also for splitting up
groups of objects for placing in different files. By using the optional settings for the Specify
parameter (All-> Keymap, All-> Program, Samples Only etc.), you can separate the group of
objects that you want to save at any level of the object tree that is necessary.
Examples of possible operations using Multiple Object Selector:
• Select all the keymaps that are dependents of a block of programs.
• Select all the samples starting from ID 398.
• Select all the objects that have “piano” in their object name.
• Select the programs, setups, and effects that are dependents of song 200.
• Select all of the keymaps and samples that are dependents of songs 400-410.
Macros
The K2661 lets you create lists of disk files called macros. The files can be located on any SCSI-
based disk or SmartMedia card. Files from SCSI disks in Roland and Akai format can also
appear in macros. Ensoniq files are not currently supported by K2661 macros.
Macros are stored in a data object called a Macro table, and these can exist in two forms:
• A Macro table object in the K2661’s nonvolatile RAM. We call this the RAM Macro table.
• A disk file, containing one Macro table object. This disk file is called a macro file, and it has a
.MAC extension (visible in the directory listing).
Macros are used primarily to load a K2661 with sound and sequence data from several files, or
with selected objects within files. When a macro file is loaded, every selected object in every
selected file in that macro file’s Macro table will be loaded, according to the order of the entries
in the Macro table.
The Macro Page
There can be only one Macro table in the K2661’s memory at any time. This object is created for
the first time by turning on Macro Record mode, from the MACRO page, which you reach by
pressing the Macro soft button on the Disk-mode page, as shown below.
DiskMode||||Samples:12313K||Memory:102K|
Path|=|\CYBER\||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
CurrentDisk:SCSI|2||||||||Startup:Off|||
||||||||||||||||||||||||||Library:Off|||
Direct|Access,|84MB|||||||||||||||||||||
Psyquest|PS-427||||||||XMC1.7|||||||||||
<more|||Load|||Save||Macro||Delete|more>
To Next Page
Loading...
