EasyManua.ls Logo

Kurzweil K2661 - Page 205

Kurzweil K2661
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic Effects Mode
A Complex Studio with Real-Time Control
9-37
FXBus 3
Press Edit, then use the Chan/Bank buttons to select FXBus 3. Here’s where our breathy ute
sound is, and it’s going through a delay FXPreset called 207*Adj Delay.
EditStudio:FXBus|Size:1|Free:1|<>FXBus:3
|||||qWWWWT|||||||||||||||||||||||||||||
FX3|!kDly|©!!!!!!!!!!!!!!!!!!!!!!!!!!!h|
|||||CVVVVB|||||||||||||||||||||||||||||
FX:|207*Adj|Delay|||||||||||||||||||||||
Wet/Dry|||:50%wet||||||||||||||||||||||||
Out|Gain||:0.0dB||||||||||||Alloc:Auto||
<more||INPUT||FXBUS|||Add|||Remove|more>
Press Edit to inside the FXPreset, and you’ll see that the Feedback Level is under FXMod
control.
Press PARAM2, and on that page, you’ll see that Delay Scale is also under FXMod control:
Go back out to the Setup (press Exit twice), press the FXMOD3 soft button, and look at the
FXMOD3 page.
On the FXMOD3 page, we see that the Delay Scale, which scales all of the various delays in the
Algorithm, is controlled by the Foot Pedal, MIDI controller 4—Control Pedal 1 for K2661
keyboard users. The delay is nominally a 480 ms loop, with four equal-spaced taps inside it, 120
ms apart. With the Foot Pedal, we can scale all those times by a factor of between 0.54 and 6.00.
Finally, the Aux Level from this bus, controlling another reverb send, is once again assigned to
MIDI controller 27, Slider G.
EditFXPreset:PARAM1|||||||EffectSize:1/1
FXAlgorithm:131|4-Tap|Delay|
||||||||||||||||||||In|Gain|||:0.0dB
Wet/Dry|||:50%wet|||Out|Gain||:0.0dB
Fdbk|Level:FXMod
||||||||||||||||||||Dry|Bal|||:0%
<more||PARAM1|PARAM2|PARAM3||||||||more>
HF|Damping:25088Hz||Hold||||||:Off|
EditFXPreset:PARAM2|||||4-Tap|Delay|||||
||||||||||||||||||||DelayScale:FXMod|
Loop|Fine|:0.0ms
Tap1|Crs||:120ms||||Tap3|Crs||:360ms|
Tap1|Fine|:0.0ms||||Tap3|Fine|:10.0ms|
Tap2|Crs||:240ms||||Tap4|Crs||:480ms|
<more||PARAM1|PARAM2|PARAM3||||||||more>
Tap2|Fine|:5.0ms||||Tap4|Fine|:-5.0ms|
Loop|Crs||:480ms|||||
EditSetup:FXMOD3||||||||||||||All|Zones||
Bus:|Param:|||||Adjust:||Source:||Depth:
None|None||||||||||||||||OFF
None|None||||||||||||||||OFF
None|None||||||||||||||||OFF
<more||KDFX|||FXMOD2|FXMOD3|FXMOD4|more>
FX3||Aux|Lvl||||-50.0dB||MIDI27|||52dB
FX3||DelayScale||0.54x|||Foot||||||6.00x

Table of Contents

Other manuals for Kurzweil K2661

Related product manuals